TT-R230 - Want to grease it myself

[groundeffect_db]

Hi guys. So, my bike is just over a month old now (maybe 6 weeks actually) and I'd like to grease things I need to grease, all on my own. I want to do it on my own so I can get to understand and become more familiar with my Yamaha TTR230.



I've been reading through the manual and doing some reading here on this forum.

Here are the items I see that require grease ( THAT i CAN DO ON MY OWN ):
- Rear brake lever pivot
- Throttle cable (under the seat I can see the cable attached to the carb)
- Clutch level pivot point on the handle bars
- Clutch cable under the seat
- ???



Here is the lub I've been told to use for this type of thing:

Here are the items I see may require dealer shop tools:

- Swing Arm - there are nipples for it I think ( two nipples, one on each side of the bike, I think a grease gun is required here??? )

- Wheel bearings (front and rear)





Guys, please feel free to add items that I can GREASE BY MYSELF - and feel free to describe where the item is, as I don't know all of the parts locations yet.

thank you in advance for your replies and time!!

Cheers guys!

 

[Blink-182]

i dont think there are nipples for it on any bike? you have to dissasemble the swimgarm and grease it none of what u just described requires shop tools you can do it your self
and you grease the axle not the wheel bearings when they go out they go out they have grease inside them already