Porstala F9
Member
- Jul 30, 2003
- 345
- 0
Yikes. My friend, I, and a few of us were redoing my friends top end on his 1993 CR-125 when we were putting in the piston, and the two clips that are on the side are ready to go in, and he dropped one into the engine through a little slit! Yikes! :ugg: :whiner:
He tried to pull it out but knocked it down into the engine :|
Any advice here at all? What is he going to have to do or take apart to try and get it out. Another friend thought it would be a good idea to kick the kickstarter, and after that the kickstarter wont go down easy at all.
Is he pretty much screwed and going to have to take apart his whole tranny? :whiner:
Any input is appriciated here, thanks in advance.
He tried to pull it out but knocked it down into the engine :|
Any advice here at all? What is he going to have to do or take apart to try and get it out. Another friend thought it would be a good idea to kick the kickstarter, and after that the kickstarter wont go down easy at all.
Is he pretty much screwed and going to have to take apart his whole tranny? :whiner:
Any input is appriciated here, thanks in advance.