madcoweater
Member
- Jul 27, 2004
- 28
- 0
Almost every time I change my oil (on my RMZ) I forget about the damn washer on the small 8mm oil plug, so I end up fishing it out of the bucket of oil.
I know I'm brain-dead but this time I forgot about it and the washer was trashed with the oil.
So, should I just replace the washer with an OEM or is there something better I could use like an little rubber O-ring?
Thanks, Joe
I know I'm brain-dead but this time I forgot about it and the washer was trashed with the oil.
So, should I just replace the washer with an OEM or is there something better I could use like an little rubber O-ring?
Thanks, Joe
