Which bars are the CR high bends?

agitt73

~SPONSOR~
May 11, 2000
1,078
0
in most mags they say cr-hi and cr-low
so you might have to call them and ask
good luck with them


------------------
2000 kdx200 2000ktm 50sxpro jr
1983it250
alexis il
 

MN KDXer

Registered
Jun 7, 1999
194
0
A couple of things about the various bends. The different brands have a different idea of what actual is a CR high bend. To confuse us a little further, some give their specs in inch measurements, and others give mm. To convert, multiply the inch by 25.4 to get mm.

Basically, here's what I liked- anything past 60 mm sweep is too much pullback. 90 mm rise was about right on a KDX for me at around 6-0". (Stock bars are about 75mm rise, and 62 pullback.)

Hope this helps

------------------
-01 RM250 (mine) & 01 RM125 (kid's)
-Senior A Enduro and Hare Scramble Rider.
"Yep, that 14 yr old A Class rider is MY kid; He learned to ride from ME!!"
 

joe woj

Member
Oct 29, 1999
58
0
both my brother and i are running o'neal pro-lock bars with a high-cr bend they are sweet on the KDX and they are still a 7/8" bars so you can use your factory mounts, both our bikes have hit the ground and we havent bent either of them yet, so we think they were a bargain for the 50 bucks we paid.

------------------
 

Welcome to DRN

No trolls, no cliques, no spam & newb friendly. Do it.

Top Bottom