Wide Footpegs

[David Weber]

Are there any aftermarket wide footpegs available for a 91 kdx200 out there?
Can't seem to find any down under.

 

[G. Gearloose]

I got mine from Fredette, very nice workmanship.

 

[Mrobbins]

Also IMS. Very happy with the IMS Pro. They are wide and super sharp (when new). A search of this forum should turn up lots of info.

 

[David Weber]

do they fit?

My Austarlian delivery 91 model is an F3 (SR in the US) with the steel tank.
Do you know if the footpeg mounts are the same?

 

[KAY DEE EXER]

A cheap way is to buy from www.ballards.cc peg wideners. You weld them onto your existing pegs.

 

[David Weber]

Thanks KAY DEE EXER,
I have the 05 Ballards catalogue and was going to use that as my last resort.

 

[Oldschooldeathwish]

If you want to save some cash grab some 2 inch flat bar. Measure your pegs around the outside and cut the bar to length. Then drill a series of holes the entire length of the bar straight up the middle then cut it in half lengthways and weld the 2 pieces to your existing footpegs to make them wider just angle them out slightly as you are welding them

 

[wornknobby]

could you explain the picture? i dont quite geet you %100

 

[matt-itude]

He is saying you figure how long of a peice of metal you need and then he is getting a peice of steel twice as wide as it needs to be. drilling a set of holes down the center then (the red line) you cut the holes right down the center that gives your extensions the teeth. then you bend them around to shape and weld on.

 

[David Weber]

Thanks for the hlp guys.
I contacted IMS direct and got a set of thier super stock pegs sent to me for $135 including postage.

 

[Green Hornet]

My Austarlian delivery 91 model is an F3 (SR in the US) with the steel tank.
Do you know if the footpeg mounts are the same?

Steel tank :ohmy: Is the sun down under that F#%KING HOT!

 

[m0rie]

The SR KDX's have steel tanks because they are street legal.

-Maurice