XR650R cranks

[desert_Rob]

Hi
Does anyone know of a company making aftermarket rod kits or cranks for the XR650R's , I cant seem to find anything on them and the cost of genuine cranks over in Aus are ridiculous.
Thanks
Robbie

 

[380EXCman]

Carillo makes rods for the XR650.

 

[Rich Rohrich]

Carillo makes rods for the XR650.

... and they are works of art. :cool:

 

[SFO]

Falicon makes a rod as well and offers full crank service.
http://www.faliconcranks.com/honda.htm

 

[desert_Rob]

Thanks, I will look into these suppliers to see if they can supply a crank pin aswell as the rod, I dropped the big end so it is not in good shape. We dont seem to have any definite idea why this happened,the only things we can come up with was incorrect manufacturing tolerances but this is near on impossible because this bike has been ridden hard for a couple of years or an oil failure,I am looking into getting a sample of the oil sent to the oil company for analysis.
Robbie

 

[pipnit]

If you dropped the big end, there isn't much of a point in sending in the oil for testing. I can tell you what you'll find, brass! :coocoo: