yzf starting-stalling?

[holeshot01]

just a quick question, why does the bike need the hot start when i am starting it cold? i have also been having problems stalling during moto's, could this be related? the bike is a 01 426. thanks.:silly: :cool:

 

[BikeDstroyer]

If you have to use the hot start to start a cold engine your fuel screw may be too rich or maybe even your pilot jet. The hot start creates a lean condition by letting fresh air in. If your stalling a lot I would also check your idle, it may be too low. It could be many different things, but that's where I would start.