Bel-Ray H1R Synthetic Oil

[duzmor]

What do you think of the Bel-Ray H1R Synthetic 2 Stroke racing Oil

I am Thinking of Useing it In a Suzuki RM 125

And what is a good mix !

Thanks
Duz

 

[viking20]

When my sons had Yamaha , we used this oil , no problems with it. ( Over here Yamaha dealerships must also sell Belray , same company imports both the oil and the bikes )
I would use 33-1 in any hard ridden 85 or 125.

 

[notenuftoys]

I use it with race gas. It's what the original owner of my bike used, so I just kept using it. Never had a problem.

 

[tyesai]

I use it exclusively at 40:1 in my CR250R

 

[Kevin003]

I used to use it in my RM 125 until the price of it around here went up. Now im back to good old AMS oil. When i used it i mixed it at 40:1

 

[bike_rider250]

i use it in my kx250 at 50:1 and works best with a higher octane gas, just my opion but i like that smell from it ;)

 

[biglou]

I used it with no problems, but I didn't use it for very long. I think RR told me that it wasn't the most anti-corrosive premix out there, but that was like 4 years ago so I might be mistaken. I've run Yamalube and Mobil MX2T with no probs whatsoever. I don't think you can go wrong with any big name synthetic or semi-synthetic premix oils.

 

[duzmor]

I got a E-Mail from SirTech at Belray.com and he is saying use the BelRay H1R at a 32:1 - 20 oz to 5gals of fuel - I see most guy's are running at 40:1

What do you think of 32:1 Mix

Duz

 

[SirHilton17]

32:1 is the way to got on a 125.... i have seen a noticeable change in topend life since i switched to 32:1... but then after that i went to 28:1.. and like it even better, my bike seems to run better with more oil in the gas.... but it is also jetted for it.
i use maxima formula K2 and i really like it

 

[kx137]

I ran it in my 00 KX125 for 4 years at 32:1. w/ good results but In the last year or so I switched to Castrol TTS and couldnt be happier.

 

[funfactor1]

Amsoil at 50-1 top quality oil at an excellent price.

 

[rm_dave]

Where are you guys getting AMSOIL at a good price? It is higher than gasoline here.

 

[crazybeef]

H1R is good oil. I wish BelRay would start putting it in normal 1 pint bottles instead of those goofy 12.8 oz. deals. With a pint bottle it would work well with 32:1 ratio by just adding 4 gal. of gas and 40:1 add 5 gal. of gas. The current bottle is a hassle for mixing at 32:1. I can't find the 1 liter bottles any more.

 

[brentl]

Not trying to state the obvious but this could work :

Add 32 x 12.8 = 409.6 oz of gas ........... 409.6/128 = 3.2 gallons of gas

( with decimal readout at the pump )

 

[flyinzuki]

I have had very good results with H1R.
I buy the one Liter bottles, and mix half of it (500ml) with 5 gals of fuel.
That will give you 37.8:1

 

[crazybeef]

Brentl,
That is a good idea, can't say I ever thought of that. A 16 oz. bottle would be better imo though.
Fyinzuki, Where do you get the liter bottles at? My shop told me they're not available any more.

 

[MXGirl230]

We run H1R in both of our bikes, no problems. We run both 125s at 40:1 his with 93 and mine with 100 octane Torco.