macko00xj

Member
Apr 2, 2007
7
0
just rebuilt the motor on my 95 ktm 300 exc, i adjusted the clutch like the repair manual said, and now when i pull the clutch lever in and put the bike in gear, the motor bogs. it did this before i rebuilt the motor also. i double checked to make sure the clutch was adjusted properly and it is. does any one have any suggestions like raising the idle
 

jason33

Member
Oct 21, 2006
655
0
does the basket have grooves wore in it? where the plates slide in-if so file them smooth again-
if a basket gets grooves wore in it the plates will drag,and do what your saying
 

keefbikes

Member
Apr 16, 2007
183
0
My bike does something close, it jumps a little or dies when I put it into first. I was told the springs in the clutch need to be replaced so I replaced the full clutch.
 

Welcome to DRN

No trolls, no cliques, no spam & newb friendly. Do it.

Top Bottom