lit549

Member
Jan 11, 2010
33
0
I just took the carb of the bike(2000 kx250),cleaned it real good and reinstalled.Now the thing starts overflowing gas out of the overflow tube.Do I have piece of trash in the needle and seat or what???I got it to start and idle for a minute and then when I gave it some gas it died and will not start.Any suggestions???
 

oldguy

Always Broken
Dec 26, 1999
9,419
0
Somehow you got the float to not seat whether it is in crooked and jammed or maybe you bent the height adjustment. You probly flooded the bike when you revved it and I would bet the plug is wet. If you put in a new plug it will probably run for a short time until the plug gets wet again.
 
Top Bottom