Hey Travis, I got the Pro Circuit Platinum Pipe/304 Race Cap Factory Sound Silencer. The jetting I'm using is a 45 pilot jet, a 155 main jet, and an R1173K needle (3rd clip). This is the jetting specs FMF recommends for the KDX200 with their pipes. I was wondering if you guys had jetting specs for your pipes?
Jetting For '01 KDX200
- Thread starter kdxsam
- Start date
ProCircuit
Member
- Jan 16, 2003
- 96
- 0
We recommend the following jetting w/ VP C12 108 Octane gas: 160 Main Jet, 48 Pilot, Stock Needle, 2nd Position, and 1 1/2 out on the air screw.
