sj13

Member
Jan 31, 2009
51
0
Ok just got the rear wheel back from the dealer... and the spacer inside the hub has a slight (not snug at all but its a very slight slop) slop between the bearings... Is this normal? I also had to get a new wheel spacer and the flat surface of the new spacer (brake side) is roughly 1/4 inch out from the outer lip of the hub. Sound right?

2002 RM250
 

aaronnaland

Member
Jan 19, 2009
104
0
Its only alright if it has like the littlest play. I mean little thought. when the wheel is put on and tightened then it should make it alright but usually they are snug before putting the wheel back on. talk to you dealer.
 

Welcome to DRN

No trolls, no cliques, no spam & newb friendly. Do it.

Top Bottom