DirtyDon

Member
Mar 29, 2002
1
0
Hi all,
I have an 02' 200,and live in northern Michigan where winter riding temps would typically be 20-35 degrees F. Elevation is 800-1000ft and my warm weather jetting is 45pilot,155main,middle clip, bike all stock. I figured I'd go back to the stock jetting for fall temps, but I'm not sure what to do for the really cold stuff. I went to the carb tuning section on the main page and tried to use the correction factor chart but I'm not sure if I'm using it properly. Does anyone ride/have similiar conditions? What do you guys do with your bikes in the winter?
Thanks,
DirtyDon
 

jc

Member
Sep 22, 2001
57
0
DIRTYDON, I RIDE A 200 IN MICH. WINTERS ALSO. I CONTACTED FRP. AND HE GAVE ME JET SIZES OVER THE PHONE THAT WORKED PERFECTLY. I JUST CAN'T REMEMBER WHAT THEY WERE!!!! I HAVE A 96 W/ THE REG. MODS, PIPE/SIL. AND AIR BOX LID REMOVED. I DID A LITTLE ICE TIME AND SOME SNOW TRAIL RIDES WITH NO PROBLEM. GIVE HIM A CALL.
 

Top Bottom