Reply to thread

Message: [QUOTE="MikeT, post: 235827, member: 21398"] Good point F350. The way to get your forks set correctly is to lube up the front axle and only tighten theaxle nut [B]NOT[/B] the pinch bolts that hold the smooth side of the axle (right side I believe). Get on the bike and push up and down on the front end a few times to get the fork leg with the pinch bolts to seat properly. Then tighten the pinch bolts. Now your front wheel should be positioned correctly. See if that helps. MikeT [/QUOTE]