Reply to thread

Message: [QUOTE="PeteN, post: 772105, member: 18725"] The CRF already has an overflow bottle built in, the front frame down tube! Just drill a small hole about 1" up from the bottom weld and tap for a small fitting, attach the tube coming from the radiator. Drill and tap another near the top and it becomes your overflow. There is also a small vent hole about halfway up the back of the tube which will need to be filled with JB Weld. Use the tube from the rad to fill the frame with a couple of inches of coolant and your set. This system works very well, keeps your radiator full, and eliminates the drips and steam. FYI [/QUOTE]