Reply to thread

Message: [QUOTE="Matt90GT, post: 1322123, member: 30871"] 06 is a good year. Jetting is super easy to setup on that bike. Yamaha did do a recall on the valves for the 06 bikes, nothing alarming. But you will want to run the vin with your local dealer if you get an 06 to make sure it is done. 07 was better for handling. They moved the steering back 3mm in the frame and tilted the motor 5* forward. Jetting on every 07 I have seen is VERY hard. Best solution found was to use the R&D power pump accelerator pump cover with adjustable leak jet . With that and an adjustable fuel screw, you can dial it in pretty well. Go up 1 size on the main and pilot also. if you can afford it, the newer model year bike is almost always better. [/QUOTE]