Reply to thread

Message: [QUOTE="sarsipious, post: 1135714, member: 74142"] Found the culprit - busted o ring gasket on the secondary carb inlet boot between the boot and the head. Replaced this and the backfiring is pretty much fixed. Now I just need to figure out what is the benchmark setting for the fuel screw. I realised also that I had gotten the fuel screw setting backwards and had screwed it all the way in (lean) instead of all the way out (rich) It seems to screw out a total of about 7 turns. I have seated it at about 3.5 turns in which is around the previous setting that it had when I bought the bike. I have purchased the manual and it seems to make no mention of this basic setting. PS. Merry Christmas [/QUOTE]