Reply to thread

Message: [QUOTE="FruDaddy, post: 972681, member: 63076"] Check the float height, it should be.82-.90 in (20.8-22.8mm) Fill the bowl with gas and see if the float sinks. Take a good look at the needle valve, that could also be the culprit. Pull the drain screw out completely, if its tip is damaged, it may not be sealing properly. I am not sure which orifice is used for the overflow and which for the drain. Plug should be NGK BP6HS or equiv, gap @ .024-.028 in (.6-.7mm) [/QUOTE]