2 Part Rotor Question

B

Bic

Member

Aug 12, 2007

16

0

• Oct 10, 2007

• #1

I need new rotors, front and back, mine are bent. I dont have much money so I was looking at "Tusk" rotors from rockymountainatv.com, has anybody ever used these and are they good? Also, if not, any other cheap solutions. These are $65 bucks a piece vs. $90-100 for other brands. Any help would be greatly appreciated.

Thanks,
Chris

 

IndyMX

Crash Test Dummy

~SPONSOR~

Jul 18, 2006

5,548

2

Amo, IN

• Oct 10, 2007

• #2

I have one on the rear of my CR125.. Works just fine.

 

M

mox69

Member

Mar 26, 2007

236

0

• Oct 11, 2007

• #3

FYI ,

I believe the "Tusk" brand is basically RockyMountainATV's brand. They don't really say it, but they are the exclusive dealer for all Tusk products.

I've purchased various Tusk branded things lately, I was happy with the quality of all of them.

 

RM_guy

Moderator

Damn Yankees

LIFETIME SPONSOR

Nov 21, 2000

7,046

208

North East USA

• Oct 11, 2007

• #4

How bad are they bent? If it's not bad you can straighten them with a large crescent wrench. It's pretty easy to do. If they are folded up bad then get new ones...and Tusk is a good way to go.

 

B

Bic

Member

Aug 12, 2007

16

0

• Oct 11, 2007

• Thread starter
• #5

They arent that bad, but bad enough to rub. I thought about trying to straighten them out, just afraid it might take more time than its worth, sounds like its worth trying to fix them first though.

 

J

jason33

Member

Oct 21, 2006

655

0

• Oct 12, 2007

• #6

they will snap more than likely if you try to straightn them---
try dave at dirt cycle salvage for a couple used factory ones---
1-508-478-5700