2-stroke basics?

Tusk

Member
Apr 5, 2006
18
0
Brand new owner of a 2003 KDX220R and it's my first 2 stroke bike. I'm a 20 year street rider and do all my own maintainence, however I have a few newbie questions as well as interest in doing the maintainence on this bike when it comes. I'll be doing some riding with my son (14) and am a safety freak.

So I've got some reading to do. I google/yahoo as much as I can for most of this...

Instead of bombarding you dirt vets with stuff, might any of you folks have any links to sites that explain some of basics of 2 stroke riding and maintainence?

One of my possible dumb questions is "Do you have to warm up a 2-stroke?" :think:

Another would be understanding the function of power reeds..

Thanks for the time.

Mark
 

Aflica

Member
May 23, 2004
66
0
Yes , you do have to warm them up nice and slowly...especially if it has a Wiesco piston in it.
Also , use a very good 2 -stroke oil , it will make the carbon build up less and provide longer life between rebuilds.If you don't , its like burning green wood in your woodstove , sure it burns , but its killin' your chimney, so use the good stuff .
 

crazybrit

Member
Feb 19, 2006
63
0
robwbright said:
http://www.ericgorr.com/twostktech/twostroketech.html

Buy this book - the first one on the page - pretty much everything you need to know. Get a service manual for your bike as well.

http://www.ericgorr.com/books/books.html

How much of " Motocross & Off-Road Performance Handbook" is 2-stroke specific? From the info on Motobooks.com it contains info on the CR's.

Has anyone read either "The High-Performance Two-Stroke Engine" by Dixon (ISBN 1844250458) or "Two-Stroke Performance Tuning" by Bell (ISDN 1859606199). They are both published by Motorbooks and look real similar based on the descriptions on motorbooks.com. I've heard the Bell book is supposedly a classic (albeit focused on 125GP but makes off road mention) but couldn't find any reviews of the Dixon book.

Or does Eric Gorr's book give you everything you need to know about 2stroke motors, reeds, jetting, etc.

Tony
 

robwbright

Member
Apr 8, 2005
2,283
0

Eric's book is a great supplement to a service manual.

There is one chapter on 4 stroke technology. The rest is on either 2 strokes or dirt bikes in general.

There is also a separate 5-10 paragraph section on each generation of bikes and the best mods for each generation - i.e. for the 01-06 RM 125, or the 99-02 KX250.

It has tips on how to rebuild top ends and bottom ends, suspension set up and modification, etc . . . It even tells you the best way to replace your graphics kit.

Check on Amazon for more info and a lower price on a new/used one.

http://www.amazon.com/gp/product/07..._1/002-3627890-0163206?_encoding=UTF8&s=books
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…