Got the carb yesterday, installed the 220 needle on the 2nd notch from top & installed on bike. I do need to fine tune the jetting but its not bad. I turned the air screw in all the way and backed out about 3 turns. Now does this indicate the pilot is small or big and I should change to which?? 3 turns brought the idle down from a somewhat high to the idle speed I prefer. I have the following mods:
1-Lid Free Air Box
2-Gnarly (Rev) Pipe
3-Turbine Core 2 S/A
4-Torque Ring
5-Boyseen Power Reeds
6-35mm (200) Carb w/stock Main,Pilot & 220 Needle (1173) in place of the 200 (1174)