Chili said:The spooge is not caused by the Yamalube 2R, we've run that in all our 2 strokes for the last five years and once jetted correctly they run really clean.
flynbryan said:This would be the correct circuit to attack to fight my spooge problem since I spend so much time in the lower rpms correct?
whenfoxforks-ruled said:Power jet, pilot, needle clip, needle then main. Spooge you can not jet around points straight to mechanical issues. A little spooge is not all right, epa hazard! What does the plug look like?
2strokerfun said:In my experience, the needle usually wears out before the needle jet. And yes, it makes the bike a smoking spooge machine at low rpms. But with a 2000 model, I kind of figured needle and jet weren't too badly worn. And he really didn't talk about it running too poorly. But for the $7 to buy a new one, it's worth a shot.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?