Reply to thread

Message: [QUOTE="jmics19067, post: 907618, member: 27963"] if you have ever hit the decompresion lever while the bike was running you could have nicked the cam follower a little bit too cause a burr. MIght be just enough to stick on a dry cold aluminum start up but when it warms up the aluminum expands and gets oil..... Just a thought... if you have the valve cover off, take a close look at the right side exhaust valve lifter. There is also a chance of a slightly bent/corroded/dirty/worn valve stem where it has to ride in the valve guide doing the same thing between hot and cold [/QUOTE]