Reply to thread

Message: [QUOTE="MONKEYMOUSE, post: 657196, member: 23157"] Well, about a month ago I tuned up my 50, New plug, carb kit, rings, and some other things cleaned up the points and that. Well, it ran prime for a good wile. Then about last week I was ridding it hard and it got real hot and was misfiring real bad. I let it cool off for a few hours then tried to start it again, it woulden't. :think: I polled the plug and wasn't seeing any spark against the cly. I cleaned all the wire connections and inspected all the wires for cracks and checked the ground and all that. Put it back together still no spark. I'm getting power from the stator (held a voltage tester to the wire that connects to the voltage regulator) so I'm at a loss here. Any one have any ideas? Thanks [/QUOTE]