Reply to thread

Message: [QUOTE="Yamajeb, post: 1368413, member: 67291"] Thanks for the feedback. [I]2.5 wt oil . . . has more influence at rebound[/I] - so the lighter oil will impact rebound more than compression? What would you expect would be the impact on rebound? This goes back to my question about the midvalve - maybe I need to start looking there. [I]sprung/unsprung ratio[/I] - are you referring to preload? I don't see how I could change preload in my forks unless I got shorter springs. I DO have the stock springs which are .43 kg/mm vs the .44 kg/mm I've got in there now. I didn't know about the 3 X 0.10 stiffness = 1 X 0.15 stiffness. Seems like a lot! Again, thanks. [/QUOTE]