Reply to thread

Message: [QUOTE="Rod Overstreet, post: 1238989, member: 81484"] [b]lights[/b] You would have to change out both the stator and flywheel to do the EXC swap. Don't forget you will need a voltage regulator as well, should you decide to do a hard parts exchange. Check this out... LED Lighting System Adapts to almost any bike with a CDI ignition, except CR 250 02-07. Plugs in to your CDI, so no lighting coil is needed. The LED bulbs must be adapted to fit into what ever head light or tail light you are using (works good with Acerbis CE headlight). Puts out only enough light for enduro tech inspection, for looking simi steet legal, and is barely better than nothing for night riding. Contact Steahly Offroad at 800-800-2363 Good Luck. Rod [/QUOTE]