Air Screw

[CRrider125r]

A couple of days ago i started to mess around with my air screw because it was really boggy in low rpms. so i messed around with it until i got it so the bike was running nice and crisp. It is at 1 1/4 turns out right know and it is about 25 degrees out and i basically live on a sand bar. Has stock jetting FMF SST pipe And shorty silencer. Oh ya it is an 01 cr125(DUH). I was just wondering if this is OK.

Thanks

 

[4thGearAndPinned]

You should be OK.

 

[Pauly250]

When the weather gets cold we have to make minor adjustments to the carborator to get it to run correctly. You will have to adjust it again when it gets warm out.

 

[CRrider125r]

Cool thanks i just didn't want to mess anything up do to lack of experiance.

 

[adam728]

There's more to jetting than just the air screw. With temperatures getting that low you really need to dial in your main jet in the very least, or risk a toasted engine. What works at 70ºF doesn't work at 25ºF.

 

[CRazy250]

just make sure its not running to lean.

 

[CRrider125r]

it seems to be really smokey. How can tell if it is lean.