Reply to thread

Message: [QUOTE="WaltCMoto, post: 889373, member: 21177"] I use d-rings and turnbuckles with the bike on a crate.(thanks mx547) I like this set up because it leaves the floor space open for sleeping in there. I used large washers over the 3/8 bolts only and have had no issues. It would take quite a jolt to pull four 1 1/2 " washers through 3/4" plywood. As far as putting a few to many holes in the floor, ITS A DIRT BIKE TRAILER. You can always patch them or just leave the d-ring there and put in anouther one where you need it in the new set up. you can never have to many tie down points. [/QUOTE]