I found this in one of the shops and the original owner has passed on. I thought it was a work stand but it’s too short even for the 91 Honda XR200R.
The legs in front come off, just set in a hole, the back leg is bolted on, and the ramp stays in place with a loose bolt. The front has this “U” shaped handle that’s bolted in the pockets and is free to move fore and aft. It had adjustable collars with a peg.
I cleaned it up and put it together thinking I’d found a cool work stand but it’s too short for any bike I’ve got except a little Honda 100 peewee.
It looks like aluminum that is 0.0787 (2cm) thick. Probably from the 1990’s based on the original owner. No ID except some numbers on the legs and u-handle but that looks like stock numbers. Nothing to say who built it or when. I know the owner didn’t build it.
Wheel channel is 54” long.
Appreciate any info, apologies for long “first post”.
The legs in front come off, just set in a hole, the back leg is bolted on, and the ramp stays in place with a loose bolt. The front has this “U” shaped handle that’s bolted in the pockets and is free to move fore and aft. It had adjustable collars with a peg.
I cleaned it up and put it together thinking I’d found a cool work stand but it’s too short for any bike I’ve got except a little Honda 100 peewee.
It looks like aluminum that is 0.0787 (2cm) thick. Probably from the 1990’s based on the original owner. No ID except some numbers on the legs and u-handle but that looks like stock numbers. Nothing to say who built it or when. I know the owner didn’t build it.
Wheel channel is 54” long.
Appreciate any info, apologies for long “first post”.
Attachments
-
035CE61F-029C-41A5-A804-45E90B1A5250.jpeg -
E5056D0F-5217-416D-9E79-E7C4D2F23B5C.jpeg -
3B80D547-3BF6-4394-8D6C-4F8CE8B72D7E.jpeg -
5EA2AAE1-4992-4384-94D3-22CEF1BD308C.jpeg
