Reply to thread

Message: [QUOTE="oldguy, post: 1324042, member: 16965"] I agree with Mxgirl on not using soap water. I usually do it dry but I have done quite a few so usually get lucky. If you use something to help keep it from sticking right away a glass cleaner (windex) is usually the best. Stay away from heat until you get to spots that you need a little bit more flex to make curves- if you heat to much the graphics can stretch easier giving a worse fit. I like to only tear off the backing in portions that I am working at that time most of the time I do it in 1/3s so the opposite end does not rest on the plastic and stick in the wrong place. Use the squeegee or a clean cloth to work bubbles out as you go and then before the final dry use a sharp needle to punch a hole and then smooth the bubble out thru it. I also like to leave the finished plastics sit in the sun for a day or two to set up the glue before riding [/QUOTE]