tweakedlogic
Member
- Sep 13, 2007
- 5
- 0
I really need a new pipe and muffler for my newly acquired money pit, a 1981 PE175. The pipe is so beat up from rocks it has a hole in the bottom, won't fit tightly in the exhaust port and is smashed in by about half in some parts creating restriction.
So I need a pipe and muffler. Can I use one intended for another bike? Is there an after market company that makes one that will fit?
As a last resort, is it possible to cut a section out of another pipe and weld into the damaged section on my pipe?
Then I need a muffler. The guts are coming out the back of it and it does not muffler very well. The OD on the pipe at the muffler is 1 1/8" AKA 29mm.
Any help would be appreciated.
So I need a pipe and muffler. Can I use one intended for another bike? Is there an after market company that makes one that will fit?
As a last resort, is it possible to cut a section out of another pipe and weld into the damaged section on my pipe?
Then I need a muffler. The guts are coming out the back of it and it does not muffler very well. The OD on the pipe at the muffler is 1 1/8" AKA 29mm.
Any help would be appreciated.