I'm offering any of the products that I currently make.
I'm also offering a brand new product. I'll call it the "Racer" bag - if you don't want something as big as the Medium or KDX bag, I'll have within 2 weeks something sleek, small and light. Here's a description.
------------------
A lot of trail riders seem to like my KDX or Medium fender bags. But I think some are turned off by the bulky appearance. And some feel that one of these bags would get in the way. A slimmer, smaller, lower bag might suit them better.
So I've been thinking for several years about a "racer" fender bag, basically a bag big enough to hold the essential tools and no more - an enduro tool kit perhaps.
1) shape and dimensions - It would be "tapered" front to back for a more attractive appearance and to get out of way.That would make it about 5.5" wide (at the front), 7" long (long enough for anything but a tire iron), ~1.5" high. It would taper to about 4" at the rear. This is a shape and size that would fit KTMs nicely, but also lots of other bikes like YZs and KXs.
2) inside features - foam bottom and built in multi-size elastic tool slots, similar to my tool wrap and fanny pack. So there would be lots of flexibility in the tools that would be held tightly.
3) zip open flat - the bag would zip open and lay flat (on the back of the fender) so that the bottom of the bag and the top of the bag could both hold tools. Stop, zip it open, access all your tools.
4) Padded top - some sort of padded top to help protect the riders jewels and provide a sleek top, easier to slide over.
-------------------------
Given that this product is brand new I would of course send one entirely on approval. If you don't like it, don't use it. For that matter, I'll send anything on approval.
I promised Patman I'd send him a sketch and I will do that tomorrow. I'm working with the sewing people on Tuesday, so I could have one to you in 2 weeks max.