mark_england
Member
- Mar 6, 2002
- 156
- 0
I have a KDX 200 90 E series that is refusing to start!
Rode well on sunday but did encounter quite a bit of water.
I noticed on idling when opening and shutting gates the engine soundded like it was labouring as if too low a tickover.
Went to start the bike yesterday (4 days after ride out) and it refuses point blank to fire up.
When I took the flywheel cover off there was a small amount of water in there along with some corrosion.
I've checked the woodruff key, cleaned the carb, neat fuel in the barrel.
Theres a spark.
I suspect its mistiming or its the ignition coil.
Any advice..
Cheers :yikes:
Rode well on sunday but did encounter quite a bit of water.
I noticed on idling when opening and shutting gates the engine soundded like it was labouring as if too low a tickover.
Went to start the bike yesterday (4 days after ride out) and it refuses point blank to fire up.
When I took the flywheel cover off there was a small amount of water in there along with some corrosion.
I've checked the woodruff key, cleaned the carb, neat fuel in the barrel.
Theres a spark.
I suspect its mistiming or its the ignition coil.
Any advice..
Cheers :yikes: