Reply to thread

Message: [QUOTE="Patman, post: 1371996, member: 16962"] It's easy to get air trapped in the front brake system. Best to either use a vacuum pump to bleed it or pull it off and hang it up so the bubbles havee a nice easy path out (i.e. UP). Tap the hose and other parts a little and you go along to help dislodge the bubbles as they tend to stick to the walls of the hoses. It is possible you need to rebuild / replace the master but that's sort of an on-site determination. You might not have a good seal on your bleed hose, maybe the nipple is too lose, cracked, bad thread.... Start with the easy stuff and that's doing everything possible to bleed it properly. [/QUOTE]