Reply to thread

Message: [QUOTE="shockdoc, post: 144044, member: 23028"] Dirtbikedad, drehwurm has ya headed in the right direction. I would keep the stk. fork springs and add about 5 mm preload to them.( If softer .44 at the most.) I believe they are soft enough that you're feeling the harshness as they ride down in the stroke.Where are your forks in the clamps? Add a little preload, set your oil height 95-100 (5-7 wt.) Put your forks 10-12 mm up in the clamps. Run 20-25 mm free sag on back. Mess with your clickers a little and see how it works. doc [/QUOTE]