cannot get my front wheel rotor between brake pads

M

MitchFong

Member

Jul 20, 2004

7

0

• Aug 2, 2004

• #1

i took my front wheel off today to fix a flat and now thats its fixed i cant get the rotor back between the brake pads. i cannot move them with my hands and now i have no idea how to get the wheel back on.
im sure someone is more familiar with this then i am..
thank you for any help

 

S

sunnyboy

Member

Feb 24, 2003

98

0

• Aug 2, 2004

• #2

get yourself a flat screwdriver and slip it between the pads and they will pry apart--before riding you need to pump the brake a few times to get it to close back up

 

K

kelseybrent

Member

Sep 25, 2002

266

0

• Aug 2, 2004

• #3

Take a flat bladed screw driver and ease the pads apart to give yourself a little more room. Remember to pump the lever back up after you get the wheel back on and before you ride, to reduce that first turn ass-pucker factor.

 

Patman

Pantless Wonder

LIFETIME SPONSOR

Dec 26, 1999

19,765

1

• Aug 2, 2004

• #4

I'd suggest popping the pads out and pressing the piston back with a C clamp. Less risk of messing up the pads which could them mess up the rotor.

 

Okiewan

Admin

Dec 31, 1969

29,550

2,238

Texas

• Aug 2, 2004

• #5

^^^^^^^
Anal :)

 

Jaybird

Apprentice Goon

LIFETIME SPONSOR

Mar 16, 2001

6,449

0

Charlestown, IN

• Aug 2, 2004

• #6

lol...if it's any consolation, I agree with Pat's method and logic.

 

Patman

Pantless Wonder

LIFETIME SPONSOR

Dec 26, 1999

19,765

1

• Aug 3, 2004

• #7

Okiewan said:

^^^^^^^
Anal :)

Click to expand...

And now for the news....

 

G

Green Horn

aka Chip Carbone

N. Texas SP

Jun 20, 1999

2,563

0

• Aug 3, 2004

• #8

I must've been to the Patman School of Anal Bike Repair because I wouldn't put a flat blade screw driver on a set of brake pads either. [I just don't pull the wheel to begin with]...

You could get away with using a screw driver but I'd wrap a rag around it first.

[] - represents Patman's witty comeback to Greenie. :laugh:

 

K

kelseybrent

Member

Sep 25, 2002

266

0

• Aug 3, 2004

• #9

Yes, we wouldn't want any metal to come in contact with a brake pad ;)

Ease them apart however you see fit, but remember to pump them back up before you ride off.

 

G

Green Horn

aka Chip Carbone

N. Texas SP

Jun 20, 1999

2,563

0

• Aug 3, 2004

• #10

kelseybrent said:

Yes, we wouldn't want any metal to come in contact with a brake pad ;)

Click to expand...

Putting a rag over a screw driver helps keep the SHARP edges from SCRATCHING the pads.

Oh who am I to talk. Just use a chisel and a hammer and be done with it already...

 

MikeT

~SPONSOR~

Jan 17, 2001

4,095

11

• Aug 3, 2004

• #11

Green Horn said:

Just use a chisel and a hammer and be done with it already...

Click to expand...

There ya go! :cool:

 

K

KAY DEE EXER

~SPONSOR~

Mar 3, 2003

629

0

• Aug 3, 2004

• #12

Green Horn said:

Putting a rag over a screw driver helps keep the SHARP edges from SCRATCHING the pads.

Oh who am I to talk. Just use a chisel and a hammer and be done with it already...

Click to expand...

Don't forget to wrap the rag around the hammer so you don't damage the chisel... :nener:

 

Someone

Member

Mar 12, 2001

865

0

• Aug 3, 2004

• #13

I agree, I always use a flat blade screwdriver without a rag to split them apart.

 

L

Layton

~SPONSOR~

Aug 2, 2000

896

0

• Aug 3, 2004

• #14

Somehow I fail to see how scratching a brake pad is going to hurt it. :ohmy:

 

C

cr2504life

Member

May 17, 2004

141

0

• Aug 3, 2004

• #15

I have to do the same thing except a friend squeezed the brakes when the wheel is off and im putting new pads on so it will be even worse. If you unscrewed the bleeder screw while pushing the piston back in wouldn't it make it alot easier? Is this going to make me have to bleed the brakes again(i don't think so but...)?

 

MrLuckey

Fire Marshall Ed

LIFETIME SPONSOR

Feb 9, 2000

3,715

0

• Aug 3, 2004

• #16

cr2504life said:

If you unscrewed the bleeder screw while pushing the piston back in wouldn't it make it alot easier?

Click to expand...

If it takes anything more than slight pressure with a screwdriver then there is probably something wrong. I can't imagine scratching a brake pad (or losing sleep over it if I did) by using a screwdriver or similar item.

 

C

cr2504life

Member

May 17, 2004

141

0

• Aug 3, 2004

• #17

I have the same problem, I had my tire off to replace it and the brake pads. While it was apart a friend squeezed the brake :bang: . If i unscrew the bleeder screw will it make it any easier to pust the piston back in? Is this hard on it or will i have to bleed the brakes again? Thanks

 

C

cr2504life

Member

May 17, 2004

141

0

• Aug 3, 2004

• #18

sorry i though i messed somthing up because when i viewd the thread my post never showed up. ahh well

 

G

Green Horn

aka Chip Carbone

N. Texas SP

Jun 20, 1999

2,563

0

• Aug 3, 2004

• #19

MrLuckey said:

I can't imagine scratching a brake pad (or losing sleep over it if I did) by using a screwdriver or similar item.

Click to expand...

Thanks alot Eddie. I'm not going to be able to sleep tonight after what you just said. :moon: