Reply to thread

Message: [QUOTE="Moto Man26, post: 1209045, member: 71463"] Ok, to answer Chili's question: *I loosen up the axle nut so it can move forwards and backwards freely. *I loosen up the bolts at the end of the swing arm, to adjust the chain tension. * I move the rear wheel, by tightening/or loosening the bolts at the end of the swing arm. * When I find the chain tension is alright, I make sure that each of the adjusters on the ends of the swing arm are the same. * Then I put the nut back on the axle and tighten it. * Now it's time to go riding, but after a few minutes my chain gets really loose again. [/QUOTE]