Reply to thread

Message: [QUOTE="Zenith, post: 662614, member: 21314"] I wouldn't call it basic, but it's not rocket science either. You'll need a seal driver anyway, you can either buy or make one of these. You'll also need the usual stuff like torque wrench and std. spanners etc. of course. Here's a guide to doing the seals on modern Kayaba forks, you didn't say what bike you have so I don't know if it is any use to you though - http://www.dirtbike.com/forums/topic.asp?TOPIC_ID=10854 [/QUOTE]