cr250dave

Member
Jun 25, 2005
13
0
I normally run a BR8EG in my 03 cr250. I am going to be doing a lot of jetting changes soon and dont want to go out and get a bunch of expensive plugs to do my plug chops. is there a cheaper plug I can run while I figure out all the settings?
 

tyesai

Member
Nov 4, 2004
452
0
Don't buy them from a dealer. I was paying $7 for a BR8EG until I called NAPA. They sell them for a little less than $3 a plug. The dealers seem to be doing a little price gouging.
 

Rich Rohrich

Moderator / BioHazard
LIFETIME SPONSOR
Jul 27, 1999
22,839
16,904
Chicago
TimBRP said:
For plug reading, isn't it best to use a slightly used plug than a new one? You'll get a better color reading, so I'm told.

Nope, you can't get an accurate plug reading from anything but a new plug. If the plug is already colored you have no way of distinguishing between old and new. People assume that all old deposits will burn off, and it's just not true.

Jet on the cheap plugs and race on the good ones.
 

Top Bottom