Reply to thread

Message: [QUOTE="Red Ryder, post: 1177875, member: 76130"] Call your stealership, they can tell you right away about the threads. When removing the clutch nut, take a penny and put it between the clutch gears to hold it in place. Do not use steel to hold it because it is a harder metel and might break a tooth. It is best to use a impact driver or a pneumatic driver. When putting the clutch bolt back on make sure to use locktite and to torque it properly. There is a universal clutch holder tool that you can get at a local shop, I would get one of those it might come in usefull in the future anyway. [/QUOTE]