Reply to thread

Message: [QUOTE="High Lord Gomer, post: 1419744, member: 16469"] The clutch perch should have an adjuster where the cable meets it and the cable itself has another adjuster less than a foot from the end where it meets the clutch perch. If the stck of new plates you put in is significantly taller than the ones you took out, you will probably need to adjust the cable to make it "longer". You should have about a nickle's width worth of play so that the first fraction of an inch that you pull the level should take up the slack before it then starts pushing the pressure plate outward and letting the clutches slip. [/QUOTE]