its like a screeching grind noise and when i have it in gear the clutch like wont let my bike start and when it starts then it works but its weird is it shot
reread that bit & please report back to your English teacher. :confused:
I think I understand what you are saying. Maybe. Presumably you have a kdx of indeterminate year & size.
What you should be looking for is the steel plates are probably warped.
The clutch hub & fingers are probably grooved & the friction plates glazed.
Check the friction plate thickness while you are there. Note the early KDX basket with no plates in it bottoms out before the plates wear to their minimum thickness so an extra steel may cure this if it is the problem. Measure the stack vs the space in the hub with no plates. Later model KDX have weak springs.
Also check the fit of the hub on the shaft & the bushing there for too much wear.