Reply to thread

Message

[QUOTE="georgieboy, post: 649768, member: 21186"]
Hoi Dean, i knew already that u have been working for that shop and doing marzocchies. 
Years ago i solder the slot closed, and drilled those 4 bleedholes on progressive distances along the length. 
But now i just closed these also.
Like you said it's looked like there was only damping the last 15 cm(4 inches).
Great for rocks though but i am evolving and becoming a faster rider(i think), and so my fork must evolve with me(grin). 
By closing all the holes i now have compression from the very top of the stroke and now the clickers really work.
My question is just to figure out things, trying to understand what happens insight a fork.
To make it easier to understand i was hoping by keeping the shimstack the same for different cartridges, you guys cld make me understand what wld happen with a fork during it working cycle.
For example, what wld be the feeling in a bigger cartridge compared to a tiny cartridge. Wld the little cartridge lock up, and the bigger one be overly plush.
Wld a tiny cartridge need more freebleed to compensate etc.
[/QUOTE]

Verification

Which ocean is California closest to?