Cr 125 help

L

lake

Member

Oct 30, 2008

45

0

• Mar 15, 2009

• #1

Hey,

I'm in the middle of put new crank bearings, rod bearings and piston and ring in my CR and was wondering if the main bolt on the flywheel is right or left hand thread? I don't want to just crank on the bolt before i know which way i should be turning it for sure.

 

G

gregorious77

Member

Feb 1, 2009

46

0

• Mar 15, 2009

• #2

If you turn it the wrong way it wont screw on surely

 

J

julien_d

Member

Oct 28, 2008

1,788

0

• Mar 15, 2009

• #3

gregorious77 said:

If you turn it the wrong way it wont screw on surely

Click to expand...

Reading the post I'd be pretty sure it's already screwed on securely, and needs to be removed.

I'm guessing it's RHT, but your service manual should note the fact if it is not. Hopefully you have one of those. I wouldn't recommend attempting the suggested repairs without one.

J.

 

L

lake

Member

Oct 30, 2008

45

0

• Mar 15, 2009

• Thread starter
• #4

I have a servive manual but it didn't note if it was right or left hand, and i'm trying to take it off not put it back together.

 

Patman

Pantless Wonder

LIFETIME SPONSOR

Dec 26, 1999

19,774

0

• Mar 15, 2009

• #5

Generally if it isn't noted in the service manual I look really close at the end of the bolt and can figure it out from there.

 

N

noj

Member

Mar 22, 2009

5

0

• Mar 23, 2009

• #6

I took the flywheel off my 96 cr 2 weeks ago n that was left hand thread so guess yours would be too!!!!