CR brakes for a YZ

2

2001yz250

Member

Mar 27, 2002

501

0

• Apr 4, 2002

• #1

Does anybody know if any year Honda CR rear brake caliper and master cylinder will fit a '01 YZ250? I don't know what makes the Honda brakes so good, but I miss having them. My YZ's brakes aren't too bad, at least not KTM bad,(sorry KTMers) but not near as good as the CR's.

 

bclapham

LIFETIME SPONSOR

Nov 5, 2001

4,340

0

• Apr 5, 2002

• #2

i would try new fluid and possibly a braided line before going to those extremes!

good luck


bruce

 

M

MX145

Member

Dec 29, 2001

131

0

• Apr 5, 2002

• #3

Being a previous CR owner myself, I know what you are experiencing. Fastline makes a CR style braided hose that you can use on your 250. You will also have to change the lower fork protector brake line mount and mount a cable guide on your #plate. You can view a picture of my setup HERE and if you send me an email or private message I can get you more pictures, details and part #'s needed if so desired.

 

2

2001yz250

Member

Mar 27, 2002

501

0

• Apr 5, 2002

• Thread starter
• #4

Hey, thanks guys. I'll think I'll try the braided line!

 

MX-727

LIFETIME SPONSOR

Aug 4, 2000

1,810

13

• Apr 5, 2002

• #5

Here is a link to a closer view of the DSP clamp:

http://www.dirtrider.net/cgi-bin/photopost/index.pl?photo=1498

 

B

BEEF706

Sponsoring Member

Jan 24, 2002

1,566

0

• Apr 5, 2002

• #6

I had a fastline front on my YZF and felt it made a lot of difference. Didn't try the back but I bet it would be a good upgrade as well. :cool:

 

bclapham

LIFETIME SPONSOR

Nov 5, 2001

4,340

0

• Apr 5, 2002

• #7

MX145:

you might want to put the pictures in the members section since i am sure other will want to see them! i think i will eventually go for the cr routing and also put the carbon fiber guards on at the same time. I saw that DSP has brough out the complete kit (brake line, guards and clamps for about 190 bucks) i wonder how their line compares with the fastline?

cheers
bruce

 

M

MX145

Member

Dec 29, 2001

131

0

• Apr 5, 2002

• #8

Bruce - I would love to post more pics up on the site but unfortunately I'm at my max space according to drn. I could give a lot of good shots and advice/info - but I'm limited at this time.

 

bclapham

LIFETIME SPONSOR

Nov 5, 2001

4,340

0

• Apr 6, 2002

• #9

Thanks anyway! it doesnt seem like such a big job. i did a brake line on my old CR so i assume this qualifys me!

 

M

MX145

Member

Dec 29, 2001

131

0

• Apr 6, 2002

• #10

Go for it!! It really isn't that hard to do. With a little bit of enginuity I was able to use my stock guards without even purchasing an additional brake line clamp. I use that setup for my practice sessions usually and it works just fine. I do have an extra ProCircuit #plate guide if you're interested. It is brand new still in the package and shipping from me to you will be alot less than from them. Let me know how your project is going and if you have any ?? give me a holler - I'll be more than happy to send you some advice or pic's if necessary. Ride On!