VinceHayward
Member
- Nov 24, 2002
- 3
- 0
Originally posted by VinceHayward
Bike: 1992 (yes 92) CR250
6. Check flywheel and it's placement on crank.
Any suggestions?
Originally posted by Nevada Sixx
may recheck your wiring to make sure cdi and all is plugged up correctly,, was this a new cdi and stator that you ordered? specically for your bike? where at on the frame was the welding done? was it running well before the weld job? is your pipe plug out? (if you use one)
A bike has to have three elements in order to run, fuel, air and fire. I know you have checked some of these, but humor us, we're trying to help.
Originally posted by smarttoys
It should be compression, fuel and a timed spark(I know, I'm getting picky). My reply goes off of the fact that he claims it ran fine before the stator and CDI were damaged. Compression and fuel won't do much without a correctly timed spark. Yes, basic things should be checked but a 10 year Honda tech (who is helping him) should have helped him cover the basics already. ;)
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?