Reply to thread

Message: [QUOTE="Ol'89r, post: 555876, member: 17212"] Not in a good way. sraser. Check around to see if there is anyone in your area that does heli-arc welding. Some of your local shops may have someone that does this. Drain the oil from your engine and clean the broken area with lacquer thinner or something similar. If the hole is as small as you say, they shouldn't charge you very much to weld it up. If the welder is any good, he should be able to fix it to where you can't even tell it was broken. Much more permanent then JB Weld. Just my $.02 [/QUOTE]