CRAZYMLH!!!!! U can help me , re KDX 200 F

[KDX200fromAUS]

Gday mate, I have the a KDX200F (Australian model) (CRAZYMLH!!) and am in need of the wiring diagram to suit, i read in another thread that you have one that you may be able to send, if so could you so kindly forward a copy to me.

Im up to the final stages of complete rebuild/overhjaul and the old owners took all the indicators off etc and im sure my coil is weak but would like the specs to be able to compare against...

Thanks ...Chris.

 

[Crazymlh]

I have the wiring diagram, which I will send to you, but it does not have the ignition coil resistance measurements on it. These measurements are in the normal KDX200 manual. Do you have a manual?

 

[Crazymlh]

See this thread

Click

 

[KDX200fromAUS]

Thanks heaps, but it still seems o be not the one im after, my flywheel/magneto has 4 wires coming outta it, all the diagrams i have seen only have 3....i know it may not be anything major, but i'm rewiring it so i'd like to know the correct/original ways to go about it...


thanks again

 

[Crazymlh]

I will check mine out this weekend and see where they all go.