Look again.
Try the top LH forward corner of the cylinder..and the head (as the head is installed on the cylinder. It's a large letter, easily visable.
re: Also while im here please tell me if I look into exhaust port with pipe removed arent I supposed to see the kips valves or something.
You'd better hope!!
You can see the subport drums and the main flapper. If you take off the slotted cover on the LH side of the cylinder to expose the main KIPS shaft, you'll find a nut that will allow manual activation of the KIPS. Actuate the valves via rotation of that nut while looking into the exhaust port, and you'll see (you'd better!) all sorts of things moving around.
A cynical comment would be, 'If you don't see the KIPS stuff, I can 'see' your missing the alpha designation on the head/cylinder,' but not being cynical myself, I won't say that. ;)