Reply to thread

Message: [QUOTE="Jman271, post: 913674, member: 25310"] Hey guys, EG, just wondering if you knew off the top of your head what the max amount of deck clearance you have seen w/ regard to a 00 CR 125? I have a measured deck clearance of .55mm which seems excessive to me, this is w/a OEM base gasket and a Wiseco Pro-lite piston. I was thinking that the deck,(compared to some other CR's I have seen) seem to be about .005 or so. The squish test came back around 1.25mm. I am thinking that maybe I should machine the base of the cyl to get a zero deck, then recess the head as much or slightly less to give me around 1mm of squish. I will have to cc the head to see what I have in there as to keep the CR w/i spec if I take the head down and adj bowl volume. WDYT? Thanks guys- [/QUOTE]